Panasonic KX-NS1000 - Page 812

Default
1
Value Range
1–512
Maintenance Console Location
13.1 PBX Configuration
—[5-1] Optional Device—Doorphone
Programming Manual References
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—TRS— TRS Level—Day,
Lunch, Break, Night
10.7.3 PBX Configuration—[2-7-3] System—Class of Service
—Internal Call Block
Feature Manual References
10.1.15 Internal Call Block
5.1.15 Doorphone Call
Service Group Number
Specifies
the Service Group number sent to the Unified Messaging system when the incoming call destination
is the floating extension number of a UM group.
The Service Group number is used to allow the Unified Messaging system to send the applicable greeting
message to the caller.
Default
None
Value Range
None, 1–64
Maintenance Console Location
13.1 PBX Configuration—[5-1] Optional Device—Doorphone
Feature Manual References
5.1.15 Doorphone Call
20.1.2 UNIFIED MESSAGING FEATURES
VM Trunk Group No.
Specifies
the number of the VM trunk group sent to the VPS when the incoming call destination is the floating
extension number of a VM (DPT) Group (connected to a KX-NCP/KX-TDE series PBX). The VM trunk group
number is used to allow the VPS to send the applicable greeting message to the caller.
Default
1
812 PC Programming Manual Document Version 2016-03
13.1 PBX Configuration—[5-1] Optional Device—Doorphone