Panasonic KX-NS1000 - Page 818

Default
Enable
Value Range
Disable (Release DISA): The DISA port is released when a CO line-to-public CO line call using DISA is
established.
Enable: DISA stays connected for the duration of the call, to allow detection of the end of the call.
Maintenance Console Location
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System
Programming Manual References
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System—Option 1—
CO-CO
with DISA—Fwd/Transfer to Public CO
CO-CO with DISA—DISA to Private Network
Specifies
whether the DISA port is released when a CO line-to-private CO line call using DISA is established.
To enable this setting, "
CO-CO with DISA—Fwd/Transfer to Private Network" on this screen should be
set to "Enable".
Setting this to "Disable" will free up DISA ports faster, but prevent DISA being used to detect the end of a call
and disconnect the CO line quickly.
Default
Disable (Release DISA)
Value Range
Disable (Release DISA): The DISA port is released when a CO line-to-private CO line call using DISA is
established.
Enable: DISA stays connected for the duration of the call, to allow detection of the end of the call.
Maintenance Console Location
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System
Programming Manual References
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System—Option 1—
CO-CO
with DISA—Fwd/Transfer to Private Network
CO-CO with DISA—Fwd/Transfer to Public CO
Enables CO line
-to-public CO line calls to be established using DISA.
Default
Disable
Value Range
Disable: CO line-to-public CO line calls are established without using DISA.
818 PC Programming Manual Document Version 2016-03
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System