Panasonic KX-NS1000 - Page 831

Default
Not stored
Value Range
Max. 20 characters
Maintenance Console Location
14.1 PBX Configuration
—[6-1] Feature—System Speed Dial
Feature Manual References
18.1.9 Speed Dialing, Personal
18.1.10 Speed Dialing, System
4.1.3 Caller ID
CO Line Access Number + Telephone Number
Specifies the telephone number
(including the CO Line Access number) or feature number assigned to the
System Speed Dialing number.
Default
Not stored
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Maintenance Console Location
14.1 PBX Configuration—[6-1] Feature—System Speed Dial
Feature Manual References
18.1.9 Speed Dialing, Personal
18.1.10 Speed Dialing, System
4.1.3 Caller ID
CLI Destination
Specifies
the CLI destination (extension) to which incoming calls from the programmed telephone number are
routed. If a Caller ID Modification Table is being used, the modified number must match the telephone number
above (CO Line Access Number + Telephone Number) in order for the call to be routed correctly.
Default
Not stored
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
14.1 PBX Configuration—[6-1] Feature—System Speed Dial
Document Version 2016-03 PC Programming Manual 831
14.1 PBX Configuration—[6-1] Feature—System Speed Dial