Panasonic KX-NS1000 - PBX Configuration-[6-4] Feature-Second Dial Tone

14.4 PBX
Configuration—[6-4] Feature—Second Dial
Tone
A programmed Pause time can be inserted automatically between the Second Dial Tone Waiting code and
the following digits. When a programmed Second Dial Tone Waiting code is dialed after seizing a CO line, a
preprogrammed number of pauses are inserted after the code.
A maximum of 100 Second Dial Tone Waiting codes can be programmed. 20 codes are displayed at a time.
To display other sets of codes, click the applicable tab.
Second Dial Tone Waiting Code
Specifies the Second Dial Tone Waiting code.
Default
Not stored
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
14.4 PBX Configuration
—[6-4] Feature—Second Dial Tone
Feature Manual References
15.1.2 Pause Insertion
Pause Repeating Counter
Specifies the number of pauses to be inserted when waiting for the second dial tone.
Default
1
Value Range
0–20
Maintenance Console Location
14.4 PBX Configuration
—[6-4] Feature—Second Dial Tone
Feature Manual References
15.1.2 Pause Insertion
Document Version 2016-03 PC Programming Manual 839
14.4 PBX Configuration—[6-4] Feature—Second Dial Tone