Panasonic KX-NS1000 - PBX Configuration-[8-3] ARS-Routing Plan Time-Time Setting

16.3.1 PBX Configuration—[8-3] ARS—Routing Plan Time—Time
Setting
The
start times of a maximum of 4 different time blocks can be programmed for each day of the week, for the
selected Routing Plan. Each time block automatically ends when the subsequent block begins.
Time-A–D—Setting
Enables the setting of the start time for each time block.
Default
Time-A–Time-C: Enable
Time-D: Disable
Value Range
Disable, Enable
Maintenance Console Location
16.3.1 PBX Configuration—[8-3] ARS—Routing Plan Time
—Time Setting
Feature Manual References
2.1.3 ARS (Automatic Route Selection)
Time-A–D—Hour, Minute
Specifies the start time for each time block.
Note
Time-A must be the earliest block in the day, and the following blocks must be set in chronological order.
Correct programming example:
Time-A: 8:00
Time-B: 17:00
Time-C: 21:00
Incorrect programming example:
Time-A: 8:00
Time-B: 13:00
Time-C: 11:30
Time-D: 17:00
Default
Time-A: 8:00
Time-B: 17:00
Time-C: 21:00
Time-D: Not applicable
Value Range
00:00–23:59
858 PC Programming Manual Document Version 2016-03
16.3.1 PBX Configuration—[8-3] ARS—Routing Plan Time—Time Setting