Panasonic KX-NS1000 - PBX Configuration-[8-6] ARS-Leading Number Exception

16.6 PBX Configuration—[8-6] ARS—Leading
Number Exception
Specifies
telephone numbers that will not be connected using the ARS feature. When the user-dialed number
includes a leading number exception, the PBX sends the number to a CO line by the Idle Line Access method
if
ARS Mode in 16.1 PBX Configuration—[8-1] ARS—System Setting is "on".
A maximum of 200 different leading number exceptions can be programmed. 20 leading number exception
entries are displayed on the screen at a time. To display other sets, click the applicable tab.
Leading Number Exception
Specifies the leading number exception.
Default
Not stored
Value Range
Max. 16 digits (consisting of 0–
9, *, #, and X)
Maintenance Console Location
16.6 PBX Configuration—[8-6] ARS—Leading Number Exception
Feature Manual References
2.1.3 ARS (Automatic Route Selection)
Document Version 2016-03 PC Programming Manual 865
16.6 PBX Configuration—[8-6] ARS—Leading Number Exception