IP-GW Card Slot No. to notify BLF data to Network Operator
Specifies the slot number of the card used to send extension status data. This setting is only required when
using VoIP to transmit data.
Default
Undefined
Value Range
Undefined
, Shelf No. – Slot No.
Maintenance Console Location
17.3 PBX Configuration—[9-3] Private Network—Network Operator (VoIP)
Programming Manual References
9.1 PBX Configuration—[1-1] Configuration—Slot
Feature Manual References
15.1.14 Private Network Features—NDSS (Network Direct Station Selection)
Document Version 2016-03 PC Programming Manual 877
17.3 PBX Configuration—[9-3] Private Network—Network Operator (VoIP)
To Next Page
Loading...
