19.2.3 PBX Configuration—[11-2-3] Maintenance—CS
Synchronization—LAN Sync Group Setting
You can program the settings for a LAN synchronization group.
LAN Synchronization Group Number
Select the LAN synchronization group to program.
Default
1
Value Range
1–16
Maintenance Console Location
19.2.3 PBX Configuration—[11-2-3] Maintenance
—CS Synchronization—LAN Sync Group Setting
Group Control Setting—Type of Control Packet
Select the method for performing LAN synchronization.
Default
Multicast
Value Range
Multicast, Broadcast
Maintenance Console Location
19.2.3 PBX Configuration—[11-2-3] Maintenance
—CS Synchronization—LAN Sync Group Setting
Group Control Setting—IP Address for Group Control
Specifies the IP address of the group.
If Broadcast is selected for Group Control Setting—Type of Control Packet, this setting is grayed out.
Default
239.0.0.x (x is the same as the group number)
Value Range
239.0.0.1–239.255.255.255
Maintenance Console Location
19.2.3 PBX Configuration—[11-2-3] Maintenance
—CS Synchronization—LAN Sync Group Setting
Synchronization Level Setting—Level of Synchronization Establish (ns)
Specifies the threshold for establishing LAN synchronization.
Document Version 2016-03 PC Programming Manual 929
19.2.3 PBX Configuration—[11-2-3] Maintenance—CS Synchronization—LAN Sync Group Setting
To Next Page
Loading...
