6.3 Tool—Call Pickup for My Group
Allows you to automatically configure settings in 10.6.2 PBX Configuration—[2-6-2] System—Numbering
Plan—Quick Dial and 12.1.3 PBX Configuration—[4-1-3] Extension—Wired Extension
—Speed Dial so
that users can answer calls to their Call Pickup Group by pressing "
0".
To activate this tool
1. When this tree menu item is selected, a confirmation screen will be displayed.
2. Click Yes.
The
Group Call Pickup feature number (default:
40) + the extension user group number of the extension
is assigned to first personal speed dial.
Note
This tool can only be activated if all of the following conditions are met:
– The first Quick Dial setting is empty or is already set to "
0".
– " 0" is not used for another feature number.
– The Group Call Pickup feature number has been assigned.
– The Personal Speed Dialing feature number has been assigned.
– The extension user group number does not exceed the highest Call Pickup Group number.
Document Version 2016-03 PC Programming Manual 93
6.3 Tool—Call Pickup for My Group
To Next Page
Loading...
