Panasonic KX-NS1000 - SLC2;PRI30 Card (KX-NS0290 CE)

4.5.3 SLC2/PRI30 Card (KX-NS0290CE)
Function
A combination card including:
• 1 ISDN Primary Rate Interface port (30B channels).
• 2 extension ports with Caller ID
(FSK) for SLTs.
EURO-ISDN/ETSI compliant.
LEDs
To NT1/ Extension
To SLT
LEDs
BA
RJ45
Accessories and User-supplied Items
Accessories (included): Ferrite core ´ 1, Screws ´ 4
User-supplied (not included): RJ45 connector, Twisted pair cable
CAUTION
• When connecting this optional service card to the trunk, connect through an NT1; do not connect to
the U interface of the trunk directly.
• PRI ports are SELV ports and should only be connected to SELV services.
Notice
• When connecting the RJ45 connector, attach the included ferrite core. Refer to
"4.2.8 Attaching a
Ferrite Core".
• The cable to connect to the ISDN Primary Rate Interface port of the SLC2/PRI30 card should be
CAT 5 (Category 5) or higher.
Note
• In some countries/areas, this optional service card must not be connected to the Public Switched
Telephone Network.
• This optional service card can be used for either trunk or extension connection, by setting the A/B
switch or using the connector with appropriate pin assignments.
• To confirm the trunk connection, refer to "Confirming the Trunk Connection
" in "4.13 Starting the
KX-NS1000".
Switch Settings
Switch Type Usage and Status Definition
A/B Slide Select A (default) for trunk or B for extension use.
162 Installation Manual
4.5.3 SLC2/PRI30 Card (KX-NS0290CE)