Panasonic KX-NS1000 - Page 21

Connecting the AC Power Cord
1. Plug
the AC power cord into the PBX and pass the cord through the hook clip as indicated. Push the hook
clip in the direction of the arrow until it clicks.
Note
For safety reasons, do not stretch or pinch the AC power cord.
To earthed AC Outlet
2. Plug the other end of the cord into an AC outlet.
System Initialisation Procedure
1. Slide the System Mode Switch to the "SYSTEM INITIALIZE" position.
STATUS Indicator System Mode Switch
2. Turn on the power switch of the PBX. The STATUS indicator will flash green.
Getting Started 21
3.1 Starting the PBX