2. Assign extension numbers to the SIP extensions.
• If
the Automatic Extension Number Set for Extension
Card feature is enabled, the extension numbers of
SIP extension are automatically assigned. To
programme this feature, refer to "9.30 PBX
Configuration—Configuration—Option—
New
Card
Installation—Automatic Extension Number Set
for Extension Card" in the PC Programming Manual.
• If not, enter the extension number for each SIP
extension manually.
3. Set passwords for the SIP extensions.
a. Click
the cell in the Connection column for each SIP
extension you wish to register. The Command
Connection screen appears.
b. Click OUS.
c. Enter a password in the Password box for each SIP
extension.
d. Click Apply.
e. Click the cell in the Connection column for each SIP
extension to which a password has been assigned.
The Command Connection screen appears.
f. Click INS.
g. Click OK.
Note
Alternatively, it is possible to set an extension
number as a password for each SIP extension
automatically.
• In order to set the password automatically, do the
following in substitution for step c of the procedure
above.
a. Click Copy to. A screen will appear with
information on assigned extension numbers for
SIP extensions.
b. Click Select All.
c. Click Execute to copy each Extension Number
to Password.
d. Click Yes.
e. Click OK to return to the Port Property screen.
• When copying extension numbers to passwords,
you
can also use the
icon on the bottom left of the
Virtual SIP Extension Port Property screen.
52 Getting Started
4.3.2 Registering IP Telephones
To Next Page
Loading...
