To switch FWD/DND status for outside calls
PT
Press the fixed
FWD/DND
button.
While on-hook (when in FWD/DND Setting Mode)
The current FWD/DND status
for outside calls is displayed.
Press the fixed
FWD/DND
button again to switch the status.
To switch FWD/DND status for intercom calls
PT
Press the fixed
FWD/DND
button.
While on-hook (when in FWD/DND Setting Mode)
The current FWD/DND status
for intercom calls is displayed.
Press the fixed
FWD/DND
button again to switch
the status.
2
Enter 2.
• When you switch the FWD/DND status, any FWD destination that was set previously is not
cleared.
1.6.1 Forwarding Calls
102 Operating Manual