Panasonic KX-NS1000 - Showing a Message on the Callers Telephone Display (Absent Message)

To set
Off-hook.
Enter 7 5.
On-hook.
Enter required number.
2
3
4
Unconditional
Busy
No Reply
PT/SLT/PS
7 5
your MSN
Enter your multiple
subscriber number
(MSN).
desired phone no.
Enter desired
phone number.
Enter #.
#
Enter #.
#
C.Tone
outside
line no.
Enter #.
#
Enter outside line
number (3 digits).
To cancel
PT/SLT/PS
Off-hook.
Enter 7 5.
On-hook.
7 5
your MSN
Enter your multiple
subscriber number
(MSN).
Enter #.
#
C.Tone
outside
line no.
Enter #.
#
Enter outside line
number (3 digits).
Enter 0.
0
To confirm the condition
PT/PS
Off-hook.
Enter 7 5.
On-hook.
7 5
your MSN
Enter your multiple
subscriber number
(MSN).
Enter #.
#
C.Tone
outside
line no.
Enter #.
#
Enter outside line
number (3 digits).
Enter 1.
1
The display shows
the selected type.
1.6.2 Showing a Message on the Caller’s Telephone Display
(Absent Message)
You can show the reason you do not answer, if the caller uses a Panasonic display proprietary telephone.
There are eight preprogrammed messages and one for your personal message (16 characters). The
selected message is shown on the display of your telephone. For callers using KX-UT series SIP phones or
S-PSs, the message will not be shown on their display.
1.6.2 Showing a Message on the Caller’s Telephone Display (Absent Message)
106 Operating Manual