PT/PS
To end a conversation with a specific party
During a conversation
(DSS)
Press DSS.
To end a conversation with the party who
joined the conversation last
Press TRANSFER.
To disconnect the party who joined the
conversation last from the conference group call
Press FLASH/RECALL.
• In this case, the FLASH/RECALL button must be set to Flash/Recall mode through system
programming.
Broadcast Mode
If this mode is selected through system programming, the caller can call multiple parties in a conference
group, make a voice announcement, and then establish a multiple party conversation with the called parties.
This conversation will be heard by all called parties. Called parties can listen to the announcement simply by
going off-hook. They can send a notification tone if they want to join the conversation.
1.7.3 Making a Conference Group Call
114 Operating Manual
To Next Page
Loading...
