Panasonic KX-NS1000 - 2.10.4.3 Off-hook Call Announcement (OHCA)

To send an external delivery message
PT/SLT/PS/SIP Extn./S-PS
Enter 931.
9
Log in to your mailbox.
Go to "To specify a single recipient"
or "To specify multiple recipients
(external message delivery list)".
13
To specify a single recipient
State the recipient’s name.Enter 2
to accept.
2
Enter the outside line access number
needed for making outside calls.
outside line access no.
Dial the outside party’s telephone number
(including area code if needed).
Outside party’s
telephone no.
Enter a 4-digit password
required for listening to the message.
4-digit password
Press # if you do not want
to set a password.
Enter # for immediate delivery.
#
Enter 1
to end recording.
1
Go to
"To record your message".
To set message delivery time,
go to "To set message delivery time".
Continued on next page
Enter 1.
1
C.Tone
To specify a extension instead of
an outside telephone number,
enter the extension number,
then skip the next step.
*
• * If you are using an ISDN or SIP line in en bloc dialling mode, to insert a pause or special
command in the middle of the telephone number, pause momentarily while entering the
telephone number. You will hear a list of available options, for example, "To add more digits,
press 4. To insert a pause, press 5.".
1.8.4 Sending Messages
Operating Manual 147