Panasonic KX-NS1000 - 2.11.9 Calling Party Control (CPC) Signal Detection

To assign telephone numbers for call transfer to outside line
PT/SLT/PS/SIP Extn./S-PS
Enter 56.
On-hook.
Enter 2 to accept.
2
Log in to your mailbox.
65
Enter the outside line access number
needed for making outside calls.
outside line access no.
Dial the outside party’s telephone number
(max. 32 digits including outside line access number).
outside party's
telephone no.
If you have already stored a telephone number
and wish to change it, press 1 before continuing.
To cancel telephone numbers for call transfer to outside line
PT/SLT/PS/SIP Extn./S-PS
Enter 563.
On-hook.
Log in to your mailbox.
65 3
• This feature must be enabled for your mailbox by the System Administrator.
• If you are using a PRI line, you may need to enter # at the end of outside telephone
numbers. Consult your System Administrator for more information.
Voice Mail Transfer
If you cannot answer calls, you can forward them to your mailbox. You can select the type of incoming calls
(Intercom Calls/Outside Calls/Both Calls) that are forwarded.
If your telephone has a Message button, the Message light turns on when a message is left in your mailbox.
You will hear an indication tone* when going off-hook, regardless of whether or not your telephone has a
Message button.
You can also create a Voice Mail Transfer button on your phone to transfer received outside calls to a
mailbox of another extension so that calling parties can leave messages. Using the Voice Mail Transfer
button, you can also perform operations with one touch (for PT and PS only).
1.8.5 Transferring Calls
158 Operating Manual