To set and clear FWD/DND for outside/intercom calls
PT
Enter
1 or 2
.
Press the fixed
FWD/DND
button.
Press
STORE.
0
FWD/DND off
DND on
1
While on-hook (when in FWD/DND Setting Mode)
Press
STORE
to set.
1
2
Intercom Calls
Outside Calls
OR
A confirmation tone will
be heard.
OR
Enter
0 or 1
.
*
• * This step can be omitted.
To set and clear FWD/DND for all calls
KX-UT113/KX-UT123/KX-UT133/KX-UT136/KX-UT248
Press UP or DOWN with
the Navigator Key
to select the desired item.
Press the fixed
FWD/DND
button.
FWD/DND Off
While on-hook
Press
ENTER to set.
OR
A confirmation tone will
be heard.
: FWD/DND off
Do Not Disturb
: DND on
1.9.3 Receiving Call Waiting (Call Waiting/Off-hook Call
Announcement [OHCA]/Whisper OHCA)
During a conversation, you can be informed of a call waiting with a tone or voice announcement through
your built-in speaker or handset. (Default: Disable—No call [Intercom calls]/No tone [Outside calls])
Call Waiting Tone:
a waiting tone through the built-in speaker of PT/handset of SLT. To change the tone from PT, refer to
"3.1.2 Settings on the Programming Mode".
OHCA:
a voice announcement through the built-in speaker
1.9.3 Receiving Call Waiting (Call Waiting/Off-hook Call Announcement [OHCA]/Whisper OHCA)
184 Operating Manual