To clear Call Log History
Press "LOG".
Display PT
LOG
Press "CLEAR".
CLEAR
• The accumulated data is cleared.
"****" shows if the number to be displayed exceeds the maximum displayable digits.
Monitoring and Changing the Log-in/Log-out Status of Extensions
The Supervisor extension can monitor the Log-in/Log-out status of the incoming call distribution group
members by the DSS button light. It can also change their Log-in/Log-out status if needed.
To monitor
Press "SPRVS".
Display PT
SPRVS
After viewing the status of waiting calls
To change the Log-in/Log-out mode
Press desired DSS.
Display PT
(DSS)
• The DSS button light shows the current status as follows:
Off: The extension is not in the group.
Green on: Log-in (Ready) mode
Flashing green: Log-in (Not Ready) mode
Red on: Log-out mode
1.10.2 Monitoring and Controlling the Call Status of an Incoming Call Distribution Group (Incoming Call Distribution
Group Monitor)
Operating Manual 197
To Next Page
Loading...
