Headset
Wrap-up
Log-in
Log-out
Company-A
Company-B
Company-C
Company-D
Page 3
Headset
Wrap-up
Log-in
Log-out
Company-A
Company-B
Company-C
Company-D
Page 2
S-CO1
S-CO2
S-CO3
S-CO4
S-CO5
S-CO6
S-CO7
S-CO8
Page 1
Bank
Home
Sales-1
Sales-2
DN-1
DN-2
DN-3
DN-4
For KX-UT670:
The KX-UT670 SIP phone has 24 flexible buttons. Each button can be assigned a feature, telephone
number, extension number, etc., with a custom label for each. You can switch the display between single-
row display and full-screen display. In single-row display, 6 flexible buttons are displayed, and you can press
the Page key to display another row of buttons. In full-screen display, all 24 flexible buttons are displayed at
once.
Row 4
Row 3
Row 1
Bank
Home
Sales-1
Sales-2
Row 2
DN-1
DN-1
DN-3
DN-4
To switch display
KX-NT366/KX-NT553/KX-NT556/KX-NT560/
KX-UT248/KX-UT670
Press NEXT PAGE or Page key
to display the desired page.
OR OR OR
OR
• For KX-NT366/KX-NT553/KX-NT556/KX-NT560 users:
– When you answer an incoming call or when you seize an outside line, the display
automatically changes to the page that contains the green lit button.
– After customising each button, you can set the displayed text for the button. For details
about customising buttons, refer to "3.1.3 Customising the Buttons".
• For KX-UT248 and KX-UT670 users:
– You can customise the flexible buttons and set the displayed text for each button using
Web Maintenance Console. For details about customising buttons, refer to "Customising
the Flexible Buttons" in " Editing Settings in Web Maintenance Console" in
"3.2.1 User Programming".
– For the KX-UT248, the display shows a maximum of 10 characters for each button. For
the KX-UT670, you can specify up to 12 characters, but some characters may not be
displayed depending on the characters used.
1.14.4 Self Labelling (KX-NT366/KX-NT553/KX-NT556/KX-NT560/KX-UT248/KX-UT670 only)
Operating Manual 233
To Next Page
Loading...
