Button Feature
Call Forwarding (FWD)/Do
Not Disturb (DND)—Both
calls
Used to forward all calls to a specified destination or refuse.
FWD/DND—Outside calls Used to forward outside calls to a specified destination or refuse.
FWD/DND—Intercom calls Used to forward intercom calls to a specified destination or refuse.
Group FWD—Both calls Used to forward all the calls to your group to a specified destination.
Group FWD—Outside calls Used to forward the outside calls to your group to a specified destination.
Group FWD—Intercom calls
Used to forward the intercom calls to your group to a specified
destination.
Account Used to enter an account code.
Conference Used to establish a multiple party conversation.
Terminate
Used to disconnect the current call and make another call without
hanging up.
External Feature Access
(EFA)
Used to access special features offered by a host PBX or a telephone
company.
Call Charge Reference Used to check the total call charge for your own extension.
Call Park Used to park or retrieve a call in a preset parking zone.
Call Park (Automatic Park
Zone)
Used to park a call in an idle parking zone automatically.
For KX-UT series SIP phones (except KX-UT113/KX-UT123) and S-PSs,
pressing this button selects an idle parking zone from among the Call
Park (preset parking zone) buttons configured on the phone. Set both
the Call Park (Automatic Park Zone) button and the Call Park (preset
parking zone) button.
Call Log Used to show the incoming call information.
Call Log for ICD Group Used to have a Call Log button for incoming call distribution group.
Log-in/Log-out Used to switch between the log-in and log-out mode.
Log-in/Log-out of a specified
group
Used to have a Log-in/Log-out button for another incoming call
distribution group.
Log-in/Log-out for all groups Used to have a Log-in/Log-out button for all groups.
Hurry-up
Used to transfer the longest waiting call in the queue of an incoming call
distribution group to the overflow destination.
Wrap-up Used to switch the wrap-up status, Ready and Not Ready mode.
System Alarm
Used to confirm a PBX error. Also, pressing the System Alarm button
displays the current One-look networking status.
Time Service (Day/Night/
Lunch/Break)
Used to switch the time service mode.
Answer Used to answer an incoming call.
Release
Used to disconnect the line during or after a conversation or to complete
a Call Transfer.
1.1.5 Before Operating the Telephones
26 Operating Manual
To Next Page
Loading...
