Panasonic KX-NS1000 - Page 270

Remote Call Forwarding Set
The Message Manager can program his or her extension from a remote location to forward various types of
calls to the desired extension or an outside telephone. There are 6 forwarding settings available:
• FWD All:
Forwards all incoming calls to a specified extension number.
• FWD Busy:
Forwards all incoming calls to a specified extension number when the line is busy.
• FWD No Answer:
Forwards all incoming calls to a specified extension number when there is no answer.
• FWD Busy or No Answer:
Forwards all incoming calls to a specified extension number when the line is busy or there is no answer.
• FWD to Outside:
Forwards all incoming calls to telephone number 1 or 2 (preprogrammed in the Mailbox Setting), or to any
other telephone number.
• FWD Cancel:
Cancels the forwarding setting.
• This feature is not available when the Message Manager’s extension (assigned for Operator
1 in the Day Mode) is "default". In this case, it should be changed to the operator’s
extension number. For more information, consult your System Administrator.
• In order to use the FWD to Outside option, the ability to forward calls to trunks must be
enabled through system programming.
• Before setting Remote Call Forwarding to Outside, you should first store up to 2 destination
telephone numbers (refer to " Customising the Message Manager’s Mailbox").
To assign Remote Call Forwarding set
1. Log in to the Message Manager’s mailbox.
2.
5
3. Select the desired forwarding setting.
1
for FWD All.
2
for FWD Busy.
3
for FWD No Answer.
4
for FWD Busy or No Answer.
5
for FWD to Outside, then go to step 6.
6
for FWD Cancel, then go to step 9.
4. Enter the extension number.
5.
2
to accept the extension number, then go to step 10.
• Enter
1
to change the extension number, then go to step 4.
6. Enter the desired number.
1
for telephone number 1, then go to step 8.
2
for telephone number 2, then go to step 8.
3
for another telephone number.
2.2.2 Message Manager Features
270 Operating Manual