To cancel
PT/SLT/PS/SIP Extn./S-PS
Off-hook.
Enter 799.
0
Enter 0.
Enter stored
extension PIN.
On-hook.
stored
extension PIN
7 9 9
C.Tone
PIN: Personal Identification Number
CAUTION
There is a risk that fraudulent telephone calls will be made if a third party discovers your
password (extension PIN).
The cost of such calls will be billed to the owner/renter of the PBX.
To protect the PBX from this kind of fraudulent use, we strongly recommend:
a. Keeping your PIN secret.
b. Selecting a complex, random PIN that cannot be easily guessed.
c. Changing your PIN regularly.
• Valid numbers for an extension PIN are "0" through "9".
• If the wrong extension PIN is entered a preprogrammed number of times, the PIN is locked.
• If you forget your extension PIN or your extension PIN is locked, your manager can clear
the extension PIN and extension PIN lock.
3.1.2 Settings on the Programming Mode
You can programme features using the programming mode for a PT or PS.
– Setting Features
– Clearing Features
• To exit at any time, lift the handset.
• To enter the programming mode when using a PS, refer to the documentation for your PS.
• For KX-UT series SIP phone users and S-PS users: You cannot programme the following
features using a KX-UT series SIP phone or an S-PS. These features are programmed via
Web Maintenance Console. For more information, consult your System Administrator.
Setting Features
The default settings are shown in bold letters. For later reference, place a check mark in the boxes below to
indicate your customised setting.
Notice
The default value may vary depending on country/area.
3.1.2 Settings on the Programming Mode
Operating Manual 277
To Next Page
Loading...
