Item
Programming
Input
Selection & Parameter
One-touch Dialling
Assignment Mode
Selection
Do you prefer to set the One-
touch dialling only?
No—Normal (Any Flexible
buttons can be modified.)
Yes—Only One-touch
dialling buttons can be
modified. However, to modify
them, there is no need to enter
"2" before the number.
*1
Not available for a PS.
*2
Only available for KX-T7633/KX-T7636/IP-PTs (except KX-NT265/KX-NT321)/KX-DT343/KX-DT346/KX-DT543/KX-DT546
telephones.
*3
Not available for the KX-T7665.
*4
This setting applies to both outside and intercom calls. For intercom calls, this feature must be enabled through system
programming.
*5
Only available for certain digital proprietary telephones.
*6
Only available for IP-PTs and certain digital proprietary telephones.
*7
Only available for KX-NT300 series (except KX-NT321)/KX-NT560/KX-DT343/KX-DT346 telephones.
*8
Registering and cancelling a Bluetooth wireless headset may take time. Please avoid any interruption during that time by, for
example, going off-hook.
CAUTION
There is a risk that fraudulent telephone calls will be made if a third party discovers your
password (extension PIN).
The cost of such calls will be billed to the owner/renter of the PBX.
To protect the PBX from this kind of fraudulent use, we strongly recommend:
a. Keeping your PIN secret.
b. Selecting a complex, random PIN that cannot be easily guessed.
c. Changing your PIN regularly.
• After the programme number is entered, the programme title is displayed.
The programming screen can be changed with the Navigator Key (Up or Down).
• You can select the parameter with the Navigator Key (Up or Down) instead of entering a
number.
3.1.2 Settings on the Programming Mode
284 Operating Manual
To Next Page
Loading...
