Panasonic KX-NS1000 - System Programming Using Web Maintenance Console; User Programming

3.2 System Programming Using Web Maintenance
Console
3.2.1 User Programming
You can edit your personal information as well as limited extension and mailbox settings using Web
Maintenance Console. (You can view menus and setting items, but you can edit only a limited number of
items.)
In addition, you can download the KX-NS1000 FAX Driver and the UM IMAP Session Controller for
Microsoft Outlook. For details, refer to " Sending a Fax from your PC" and " IMAP" in "1.8.6 Other
Features".
– Accessing Web Maintenance Console for the First Time
– Logging in to Web Maintenance Console
–
Edit User Screen
– Editing Settings in Web Maintenance Console
– Automatic Two-way Recording for Manager
– Logout
• The contents and design of the software are subject to change without notice.
Accessing Web Maintenance Console for the First Time
This step is required only when accessing Web Maintenance Console for the first time.
• For the IP address of the PBX, login name, and password, ask your System Administrator.
• If the configuration of the Web browser or PC changes, the certificate may need to be
installed again. Once a certificate has been installed, Web Maintenance Console will be
displayed after step 2.
1. Launch your Web browser and input the IP address of the PBX followed by the Web Maintenance
Console port number into the address bar, and then press Enter.
2. If you connect to Web Maintenance Console using TLS, a security alert window is displayed. Follow the
prompts to install a security certificate. The procedure may vary according to your browser.
Logging in to Web Maintenance Console
After establishing a connection to Web Maintenance Console, the login window is displayed, and a login
name and password must be entered.
3.2 System Programming Using Web Maintenance Console
Operating Manual 293