To store a phone number
PT/SLT/PS
Enter #.
On-hook.
Off-hook.
Enter desired
phone number
(max. 32 digits).
desired
phone no.
Enter outside line access number
before outside phone number.
Enter
740
.
2
Enter
2
.
4 0
7
C.Tone
To set/cancel
Off-hook.
On-hook.
Enter 1 to set
or 0 to cancel.
Set
Cancel
1
0
OR
Enter 740.
4 07
C.Tone
PT/SLT/PS
To dial
• To call another party, dial the desired party’s phone number before the preprogrammed
number is dialled.
• You should assign the intercom line as the seized line when going off-hook. (Preferred Line
Assignment—Outgoing)
• It is possible to increase the delay before Hot Line is activated through system
programming. This can be useful if you require more time after going off-hook to dial
another telephone number or extension number.
Customising Your Phone
• 3.1.2 Settings on the Programming Mode—Preferred Line Assignment—Outgoing
Select the seized line when going off-hook.
Using a Preprogrammed Number (Quick Dialling)
You can make a call simply by pressing the preprogrammed number for quick dialling.
1.2.2 Easy Dialling
36 Operating Manual