To transfer a call without announcement (Blind Transfer)
Dial outside phone
number.
PT/PS
During a conversation
On-hook.
Enter 61.
16
Press
TRANSFER.
TRANSFER
C.Tone
Enter #.
outside
phone no.
SLT
During a conversation
Press Recall/
hookswitch.
Dial outside phone
number.
On-hook.
Enter 61.
16
C.Tone
Enter #.
outside
phone no.
• The availability of this feature depends on your SIP service provider.
• You cannot return to the held call after dialling the destination’s number.
Customising Your Phone
• 3.1.3 Customising the Buttons
Create or edit a One-touch Dialling button, store the Blind Transfer feature number.
1.4.2 Holding a Call
– Holding
– Holding in a System Parking Zone (Call Park)
• For users of non-KX-UT series SIP phones:
The holding operation for SIP extension users may differ from the steps in this section, and
may vary depending on the type of telephone being used.
Holding
There are two types of hold. The difference between them is that other people can retrieve your held call
(Regular Hold) or not (Exclusive Call Hold). As they can be alternated, ask your manager what the current
mode is.
1.4.2 Holding a Call
Operating Manual 65
To Next Page
Loading...
