Panasonic KX-NS1000 - Page 240

• * System programming is required for this operation.
• This operation is available only for PTs with a display.
To store the caller’s information in personal speed dialling
Press STORE.
When the desired party is displayed
Display PT
• You
can lock your call log display by using an extension PIN (Personal Identification Number),
so that you can prohibit access to your logged information (Display Lock). Refer to
"3.1.2 Settings on the Programming Mode".
• If a call arrives while you are using the call log, the call log display will be replaced with the
caller’s information.
240 User Manual
1.14.1 Using the Call Log