Panasonic KX-NS1000 - Page 272

Parameters Steps
Subscriber’s Name
1.
1
to change the current setting.
2. Record the subscriber
’s name.
3.
2
to accept.
Extension Number
1.
1
to change the current setting.
2. Enter the subscriber’s extension number.
3.
2
to accept.
First 4 Letters of the
Subscriber’s Last Name
1.
1
to change the current setting.
2. Enter the first 4 letters of subscriber’s last name.
3.
2
to accept.
First 4 Letters of the
Subscriber’s First Name
1.
1
to change the current setting.
2. Enter the first 4 letters of subscriber’s first name.
3.
2
to accept.
Class of Service Number
1.
1
to change the current setting.
2. Enter the Class of Service Number (1
–62).
3.
2
to accept.
Interview Mailbox Number
1.
1
to change the current setting.
2. Enter the Interview Mailbox Number.
3.
2
to accept.
All Calls Transfer To
Mailbox (Change Logical
Extension Status)
1.
1
to change the current setting (enable or disable).
2.
2
to accept.
Message Waiting Lamp
Notification
1.
1
to change the current setting (enable or disable).
2.
2
to accept.
Device Notification for
Unreceived Messages
1.
1
to change the current setting (enable or disable).
2.
2
to accept.
External Message Delivery
1.
1
to change the current setting (enable or disable).
• If set to "Enable", go to "Prompt Mode".
2.
2
to accept.
Prompt Mode
1.
1
for Primary.
2
for System.
3
for Caller Select.
• For System, enter the system prompt number (1–8).
2.
4
to accept the current setting, then go to "External Message
Delivery".
272 User Manual
2.2.1 System Manager Features