Panasonic KX-NS1000 - Page 316

To specify the ringing tones for each CO, ICD Group, PDN, SDN, or INTERCOM button (DPT/
IP-PT only)
Press
PROGRAM.
Press
PROGRAM.
Press ENTER or
STORE.
Enter tone type
number.
*
tone type no.
To continue
OR
R.Tone
Press CO, ICD Group,
PDN, SDN, or
INTERCOM.
OR
(CO)
INTERCOM
(ICD Group)
OR
(SDN)
(PDN)
OR
OR
OR
(CO)
INTERCOM
(ICD Group)
OR
(SDN)
(PDN)
OR
OR
Press CO, ICD Group,
PDN, SDN, or
INTERCOM.
PROG. PROG.
• * Available tone types vary depending on the telephone you are using:
– KX-NT300 series (except KX-NT321
)/KX-NT500 series/KX-DT300 series (except
KX-DT321)/KX-DT500 series/KX-T7600 series (except KX-T7665): Tone types "01" to
"30" (01–20: tone, 21–30: melody) are available.
– KX-NT265/KX-NT321/KX-DT321/KX-T7665: Only tone types "01" to "08" are available.
It is possible to enter a tone type number from "09" to "30", but you will hear tone type
"01".
– Other telephones: Only tone types "01" to "08" are available.
It is possible to enter a tone type number from "09" to "30", but you will hear tone type
"02".
• Only one ringing tone can be selected for all PDN buttons on your extension.
To clear the button
Press PROGRAM
or PAUSE.
Press ENTER or
STORE.
2
Enter 2. Press desired
flexible button.
To continue
Press PROGRAM
or PAUSE.
OR
OR
PROG.
PAUSE
OR
PROG.
PAUSE
316 User Manual
3.1.3 Customising the Buttons