Panasonic KX-NS1000 - Page 402

Feature Description and Reference
Call Forwarding (FWD) Incoming calls from extensions in other PBXs are handled as
intercom calls in regards to FWD settings.
The Boss and Secretary feature will also function over a network.
® 2.3.2 Call Forwarding (FWD)
Do Not Disturb (DND) Incoming calls from extensions in other PBXs are handled as
intercom calls in regards to DND settings.
The Boss and Secretary feature will also function over a network.
® 2.3.3 Do Not Disturb (DND)
Hands-free Answerback Incoming calls from extensions in other PBXs are handled as
intercom calls in regards to Hands-free Answerback settings.
The Class of Service with Hands-free Answerback feature will also
function over a network.
® 2.4.4 Hands-free Answerback
Internal Call Block Incoming calls from extensions in other PBXs are handled as
intercom calls in regards to the Internal Call Block feature.
For example, only branch office managers can be allowed to call
the president at the main office, but other extensions in the branch
office cannot call the president.
® 2.1.2.2 Internal Call Block
® 5.1.1 Class of Service (COS)
During a Call with Another Party
Feature
Description and Reference
Transfer to Busy Extension using
Queuing (Camp-on Transfer)
You can transfer a call over the network to a busy extension in
another PBX without having to use a Call Waiting operation.
® 2.12.1 Call Transfer
Note
Call Transfer over a network is also supported as a standard
QSIG feature. (® 4.3.4.4 Call Transfer (CT)—by QSIG)
For Incoming Calls to an Extension on Another Networked PBX
Feature
Description and Reference
Directed Call Pickup An extension user can answer a call ringing at another networked
PBX extension.
® 2.4.3 Call Pickup
Conditions
• KX-NSN002 (Activation Key for QSIG Network) is required for each Master unit to use these features.
Furthermore, all PBXs in the network must be KX-NS1000 PBXs, or KX-NCP/KX-TDE series with MPR
Software Version 4.1000 or later.
• A separate activation key is required for non-KX-NS1000 PBXs. For details, refer to the corresponding
Feature Guide.
• Enhanced QSIG features can be disabled at the TIE Table level through system programming.
402 Feature Guide
4.3.5 QSIG Enhanced Features