3.2 PC Connection
Web Maintenance Console serves as an overall system programming tool for the PBX. The Web Maintenance
Console’s Easy Setup Wizard lets you easily configure the PBX to apply installation settings to enable
communication on an IP network.
To programme the PBX, connect it to the PC via the LAN port.
When connecting the PBX via a Virtual Private Network or the Internet, refer to "5.2 PC Connection" in the
Installation Manual.
Connection via LAN
PC
Switching Hub
LAN Port
LAN
Note
For details about LAN connection, refer to "4.11.1 LAN Connection for the Main Unit" in the Installation
Manual.
Getting Started 23
3.2 PC Connection
To Next Page
Loading...
