Panasonic KX-NS300 - 1.2.3 Redial

KX-NT321/KX-NT511/KX-NT551
Press PROGRAM
while "Searching" is displayed.
To start programming
Supply power to the IP-PT.
To enter the IP address of the PBX
The IP-PT will reboot
and can then be
registered to the PBX.
To end programming
Press HOLD twice to return
to the Menu screen.
Select "PBX IP
Address".
Press SP-PHONE.
Press SP-PHONE.
Press STORE.
Select "PBX".
Press SP-PHONE.
Press SP-PHONE.
Select "Primary
PBX".
Press SP-PHONE.
Select "Secondary
PBX".
Press SP-PHONE.
To enter the IP address of the Secondary PBX (If required)
PBX IP Address
PBX IP Address
Note
• For KX-NT511 users
For details about operating the PROGRAM button and other buttons, refer to "For IP-PTs" in
"4.3.1 Assigning IP Addressing Information".
• To confirm the connection to the secondary PBX after assigning IP addressing information, (1) turn
the IP-PT’s power off, and (2) hold the STORE button and 2 key while turning the power on.
Getting Started 39
4.3.1 Assigning IP Addressing Information