Panasonic KX-NS300 - 1.2.4 When the Dialled Line is Busy or There is No Answer

KX-NT265 (Software version 2.00 or later only)
PBX IP
Address
To enter the IP address of the PBX
The IP-PT will reboot
and can then be
registered to the PBX.
To end programming
Press PROGRAM
while "Searching" is displayed.
To start programming
Supply power to the IP-PT.
PROG.
Press HOLD to return
to the Menu screen.
HOLD
Press VOLUME
to select "PBX".
VOL
Press SP-PHONE
twice.
Press SP-PHONE.
Press STORE.
• Not using a DHCP server (DHCP Server feature or an external DHCP server) when the IP-PT is on
the same LAN as the PBX
Only the PBX’s IP address can be assigned automatically to the IP-PT in the process of being registered
to the PBX. For details about registering the IP-PT, refer to "4.3.2 Registering IP Telephones".
Follow the procedure below to assign the IP address of the IP-PT, the subnet mask address, and the default
gateway address manually.
40 Getting Started
4.3.1 Assigning IP Addressing Information