Panasonic KX-NS500 - Page 128

External Pager Port 1 = Pager 1
Port 2 = Pager 2
Port 3 = Pager 3
Port 4 = Pager 4
Port 5 = Pager 5
Port 6 = Pager 6
Port Type Setting by Web Maintenance Console
CO Use
CO Use
MOH or External Pager Use
Note
• For details about power failure transfer, refer to "4.12 Power Failure Connections".
• To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "4.13 Starting the
PBX".
Pin Assignment
For Trunk Use
No. Signal Name Function
81
1 TA Tip port 1
2 RA Ring port 1
3 Reserved –
4 Reserved –
5 Reserved –
6 Reserved –
7 TB Tip port 2
8 RB Ring port 2
128 Installation Manual
4.3.4 LCOT6 in KX-NS500 (installed by default)