Panasonic KX-NS500 - Page 168

Note for KX-T7765 Users
When loosening/tightening the screw, do not scratch the cabinet wall with the driver shaft.
Cabinet Wall
2. Pass the wires through the hole in the base cover, and attach the base cover to a wall using 2 screws.
Screw
To DPH2 Card
Note
Two kinds
of screws are included with the doorphone. Please choose the appropriate kind for your wall
type.
: when a doorphone plate has been fixed to the wall
: when you wish to install the doorphone directly onto the wall
3. Connect the wires to the screws located in the back cover.
To DPH2 Card
4. Re-attach the 2 halves and re-insert the screw.
Connection
Refer to "4.7.1 DPH2 Card (KX-NS5162)
" for pin assignments.
168 Installation Manual
4.9 Connecting to a Doorphone, Door Opener, and/or External Sensor