Panasonic KX-NS500 - Page 235

KX-NT265 (Software version 2.00 or later only)
VLAN ID
VLAN Priority
To end programming
0–71–4094
After assigning
the IP addresses
Press VOLUME to
select "VLAN".
VOL
Press VOLUME to
select "QoS".
VOL
Press SP-PHONE.Press SP-PHONE. Press VOLUME to
select "VLAN (Enable)".
VOL
Press SP-PHONE.Press SP-PHONE. Press SP-PHONE.
Press STORE.
Press HOLD to return
to the Menu screen.
HOLD
The IP-PT will reboot
and can then be
registered to the PBX.
Installation Manual 235
5.7.2 Setting VLAN Parameters