Panasonic KX-NS500 - Page 245

Press "STORE".
STORE
To configure the port number of FTP Ports
To end programming
ENTER 21, 1024 – 65535 ENTER
Port No.
Select "FTP Server Ctrl Port".
ENTER 1024 – 65535 ENTER
Port No.
Select "FTP Client Ctrl Port".
1024 – 65535ENTER ENTER
Port No.
Select "FTP Client Data Port".
Return to the
Menu screen.
Continued from previous page
The IP-PT will reboot
and can then be
registered to the PBX.
*1
For KX-NT300 series (Software version 2.00 or later only) and KX-NT500
series (Software version 1.00 or later only)
*2
Optional for KX-NT300 series (Software version 2.00 or later only) and KX-NT500 series (Software version 1.00 or later only)
Note
The illustrations may differ from the buttons on your telephone.
Installation Manual 245
5.7.5 Configuration of IP Ports