To configure the port number of PTAP Ports
To configure the port number of DHCP Ports
To start programming
Press PROGRAM while
"Searching" is displayed.
Select "IP Port".
Select "PTAP Server".
7678
Password
1024
–
65535
Port No.
Select "PTAP Client".
Select "DHCP Server".
Select "DHCP Client".
Press SP-PHONE. Press SP-PHONE.
Select "Primary PBX".Press SP-PHONE. Press SP-PHONE.
1024
–
65535
Port No.
Press SP-PHONE. Press SP-PHONE.
67, 1024
–
65535
Port No.
Press SP-PHONE.
Press SP-PHONE.
68, 1024
–
65535
Port No.
Press SP-PHONE. Press SP-PHONE.
Press SP-PHONE.
Select "PTAP Server".
1024
–
65535
Port No.
Select "Secondary PBX".Press SP-PHONE. Press SP-PHONE.
Press SP-PHONE.
Continued on next page
To configure the port number of PTAP Ports for the Secondary PBX (if required)
Press HOLD.
Press HOLD.
To Next Page
Loading...
