Panasonic KX-NS500 - Page 248

KX-NT265 (Software version 2.00 or later only)
To configure the port number of PTAP Ports
To configure the port number of DHCP Ports
To configure the port number of FTP Ports
To start programming
Press PROGRAM while
"Searching" is displayed.
PROG.
Press VOLUME to
select "IP Port".
VOL
Press SP-PHONE. Press SP-PHONE.
To end programming
Press STORE.
Press HOLD to return
to the Menu screen.
HOLD
Press VOLUME to
select "PTAP Server".
VOL
Press SP-PHONE. Press SP-PHONE.
7678
Password
1024 – 65535
Port No.
Press VOLUME to
select "PTAP Client".
VOL
Press SP-PHONE. Press SP-PHONE.
1024 – 65535
Port No.
Press VOLUME to
select "DHCP Server".
VOL
Press SP-PHONE. Press SP-PHONE.
67, 1024 – 65535
Port No.
Press VOLUME to
select "DHCP Client".
VOL
Press SP-PHONE. Press SP-PHONE.
68, 1024 – 65535
Port No.
Press VOLUME to
select "FTP Server Ctrl".
VOL
Press SP-PHONE. Press SP-PHONE.
21, 1024 – 65535
Port No.
Press VOLUME to
select "FTP Client Ctrl".
VOL
Press SP-PHONE. Press SP-PHONE.
1024 – 65535
Port No.
Press VOLUME to
select "FTP Client Data".
VOL
Press SP-PHONE. Press SP-PHONE.
1024 – 65535
Port No.
The IP-PT will reboot
and can then be
registered to the PBX.
248 Installation Manual
5.7.5 Configuration of IP Ports