Panasonic KX-NS500 - Specifications; General Description

2.3 Specifications
2.3.1 General Description
KX-NS500
Main CPU Cortex A8 600 MHz
Power Input 100 V AC to 130 V AC: 2.2 A/200 V AC to 240 V AC: 1.3 A;
50 Hz/60 Hz
Power Consumption (when fully
mounted)
110 W
External Backup Battery External battery port is supported.
Memory Backup Duration 7 years
Dialling Trunk Dial Pulse (DP) 10 pps, 20 pps
Tone (DTMF) Dialling with Caller ID
(FSK/DTMF)
1600
W Maximum
Extension Dial Pulse (DP) 10 pps, 20 pps
Tone (DTMF) Dialling with Caller ID
(FSK)
Port 1-2 (on pre-installed
MCSLC16) support PFT in
combination with the port 1-2 (on pre-installed LCOT6)
connected to an analogue trunk respectively.
Mode Conversion DP-DTMF, DTMF-DP
Ring Frequency 20 Hz/25 Hz (selectable)
Operating
Environment
Temperature 0 °C to 40 °C
Humidity 10 % to 90 % (non-condensing)
Conference Call Trunk 32 parties (Default) / 96 parties (DSP card installed)
(10 ´
3
-party conference call, 12 ´ 8-party conference call, etc.)
Music on Hold (MOH) Maximum 8 ports (Level Control: 31.5 dB to +31.5 dB per 0.5
dB)
MOH: Selectable Internal/External Music Source Port
External Paging Maximum 6 Ports (Volume Control: -15.5 dB to per 0.5 dB)
LAN Port 1 (for LAN connection) 10BASE-T/100BASE-TX
(Auto MDI/MDI-X)
Extension Connection Cable SLT 1-pair wire (T, R)
DPT 1-pair wire (D1, D2)
APT 2-pair wire (T, R, D1, D2)
PT-interface CS 1-pair wire (D1, D2)
PT-interface CS (High-density) 4-pair wire (D1, D2)
DSS Console and Add-on Key
Module
1-pair wire (D1, D2)
Air-cooling method FAN
Installation Manual 39
2.3.1 General Description