37
KX-NS500AG
10.2. Fan and Power Supply Board
1. Loosen the 1 Screws(A), Remove the Fan Cover.
2. Remove the DC Motor.
3. Remove the 1connector from the Mother Board.
4. Loosen the 2 Screws(A) and 2 Screws(E), Remove the Capacitor
Cover.
5. Loosen the 2 Screws(E), Remove the Connect Plate.
6. Loosen the 7 Screws(E), Remove the Power Supply Board.
7. Remove the 1connector(AC Inlet Connect) from the Power Sup-
ply Board.
8. Remove the 1connector from the Mother Board.
9. Remove the Power Supply Board and Relay Board.
10. Remove the Relay Board from the Power Supply Board.
To Next Page
Loading...
