Panasonic KX-NS700 - Expansion Card; EXP-M Card (KX-NS7130)

4.6 Expansion Card
4.6.1 EXP-M Card (KX-NS7130)
Function
A stacking card to be installed in the Main Unit. Up to 3 expansion units can be connected.
Note
KX-NS700
requires an activation key Expansion Capacity for KX-NS700 (KX-NSF991) to stack Expansion
Unit KX-NS720. A stacking cable is included with the KX-NS720. Use the dedicated cable supplied with
the Expansion Unit, to connect the EXP-M card.
To EXP-S Car
d
A
B
C
Port 1
Port 2
Port 3
Accessories Items
Accessories (included): Screws ´ 3, slot cover ´ 1
CAUTION
When installing or removing this card, the power switch must be turned off.
Note
Status LED on Expansion Units indicates the connection status between
EXP-M in the Main Unit and
EXP-S in Expansion Units. For more detail, refer to "LED Indications" in "4.3.1 Mother Board".
Document Version 2016-03 Installation Manual 129
4.6.1 EXP-M Card (KX-NS7130)