Panasonic KX-NS700 - Mute

To clear message waiting indications left on your extension
PT/SLT/PS/SIP Extn.
Off-hook.
Enter 0.
On-hook.
Dial your
extension number.
0
07
Enter 70.
your
extension no.
C.Tone
• The Message button light or Message/Ringer Lamp shows the current status as follows:
Off: No message
Red on: You have a message
• The display shows the messages starting with the most recent call.
• At a called extension, the MESSAGE button allows you to clear message waiting indications
if you do not want to call the callers back. To clear, press the MESSAGE button and then
press the soft button. This operation cannot be performed using KX-UT series SIP phones.
• On your PT, you can establish one or more Message for Another Extension buttons.
These buttons can accept the message waiting notification of other extensions or various
incoming call distribution groups.
In other words, you can monitor the message waiting notifications of other telephones.
• A single line telephone extension user will receive a special dial tone as message waiting
notification when going off-hook.
• The message waiting lamp of a single line telephone can also let you know that you have a
message in the same way as the Message button.
Customizing Your Phone
• 3.1.4 Customizing the Buttons
Create or edit a Message button or Message for Another Extension button.
1.3.44 Mute
You can disable the microphone or the handset to consult privately with others in the room
while listening to the other party on the phone through the speaker or the handset.
To set/cancel
PT/KX-UT series
Press MUTE.
During a conversation
OR
VOICE CALL
MUTE
OR
Document Version 2014-11 Operating Manual 123
1.3.44 Mute