Panasonic KX-NS700 - Private Network Features-CLIR (Calling Line Identification Restriction)

To show either the number assigned to the CO line or your extension
Off-hook.
On-hook.
Enter 1 for public or 2
for your extension.
PT/SLT/PS/SIP Extn.
Public
Your extension
OR
1
2
Enter 7 2.
27
C.Tone
• When you forward a call to an outside party, the CLIP number for that call will be that of the
calling party or of the forwarding extension depending on system programming.
• If you use the ICD Group button to make a call to the other party, the telephone number
assigned to the ICD group will be used.
1.3.55 Private Network Features—CLIR (Calling Line Identification
Restriction)
When making a call through a private network, you can select whether the called party can see your telephone
number or not.
To show/prevent
On-hook.Off-hook.
PT/SLT/PS/SIP Extn.
Enter 7 1.
Show
Prevent
0
1
OR
17
Enter 0 to show
or 1 to prevent.
C.Tone
• You can change the mode by pressing a preset CLIR button while on-hook (There is no CLIR
button on KX-UT series SIP phones).
The CLIR button light shows the current status as follows:
Off: shows your telephone number.
Red on: prevents your telephone number being displayed.
Customizing Your Phone
• 3.1.4 Customizing the Buttons
Create or edit a Calling Line Identification Restriction (CLIR) button.
Document Version 2014-11 Operating Manual 135
1.3.55 Private Network Features—CLIR (Calling Line Identification Restriction)