To record from an external BGM (MOH) port
PT
On-hook.
Off-hook.
Enter 36. Enter 3.
3
Press STORE.
When the time limit
passes, it stops
automatically.
The message
is played back.
The message
is recorded.
You hear
the message.
Press CONF.
3 6
Progress
Tone &
C.Tone
C.Tone
C.Tone
Enter OGM floating
extension number.
OGM floating
extension no.
BGM port
no.
Enter BGM port
number (1 digit).
To clear the message
PT
Off-hook.
0
Enter 36.
Enter 0.
On-hook.
63
Progress
Tone &
C.Tone
Enter OGM floating
extension number.
OGM floating
extension no.
• The default of OGM floating extension numbers depends on system programming. For more
information, consult your System Administrator or System Manager.
2.1.4 Private Network Features—NDSS (Network Direct Station
Selection) Monitor Release
NDSS buttons can be customized on any extension connected to your PBX. An NDSS button
allows an extension user to monitor another extension connected to another PBX in a private
network. The NDSS button light shows the current status of the monitored extension. When
it becomes unnecessary to monitor an extension connected to another PBX, the manager can
stop the PBX from monitoring it. Any NDSS buttons set to monitor that extension will also stop
monitoring.
248 Operating Manual Document Version 2014-11
2.1.4 Private Network Features—NDSS (Network Direct Station Selection) Monitor Release
To Next Page
Loading...
