3.1 Personal Programming
3.1.1 Programming Information
You can customize your telephone features. For example, you can change the initial settings or button features
according to your needs.
Available Extension
Any extension in the PBX
Required Telephone
A Panasonic Proprietary Telephone (PT), Portable Station (PS)
Conditions
Programming extensions must be idle, on-hook and holding no calls.
3.1.2 Personal Programming
You can program features using the programming mode for a PT or PS.
• To exit at any time, lift the handset.
• To enter the programming mode when using a PS, refer to the documentation for your PS.
• For KX-UT series SIP phone users: You cannot program the following features using a
KX-UT series SIP phone. These features are programmed via Web Maintenance Console.
For more information, consult your System Administrator.
• If you change your desk and extension, refer to "1.3.76 Walking Extension".
Setting Features
The default settings are shown in bold letters. For later reference, place a check mark in the boxes below to
indicate your customized setting.
Follow
programming
input.
To program To exit
To enter the programming mode
Follow Selection
& Parameter.
Press PROGRAM
or PAUSE.
Press PROGRAM
or PAUSE.
selection &
parameter
programming
input
OR
PAUSE
OR
PAUSE
Press ENTER
or STORE.
OR
Press ENTER
or STORE.
OR
282 Operating Manual Document Version 2014-11
3.1.2 Personal Programming
To Next Page
Loading...
