Panasonic KX-NS700 - Manager Programming; Programming Information; Changing the Settings and Extension Control

4.1 Manager Programming
4.1.1 Programming Information
The manager can program the following item.
• Other Extensions Control
Available Extension
The extension assigned as a manager
Required Telephone
A Panasonic Proprietary Telephone with display (2 lines or more)
(e.g., KX-NT343, KX-NT546, KX-DT346, KX-DT546, KX-T7636)
Manager Password
To enter programming mode, the manager password (max. 10 digits) is required. (Default: 1234)
CAUTION
• The PBX has a default password preset. For security, change the password the first time that you
program the PBX.
• It is strongly recommended that a password of 10 numbers or characters be used for maximum
protection against unauthorized access. For a list of numbers and characters that can be used in the
password, refer to "1.3.14 Character Entry".
• To avoid unauthorized access to the PBX, keep the password secret. If it becomes known to others,
the PBX may be misused.
• Change the password periodically.
Conditions
The programming extension must be idle, on-hook and holding no calls.
4.1.2 Manager Programming
Changing the Settings and Extension Control
Follow
programming
input.
To exitTo programTo enter the program mode
manager
password
Press
HOLD.
Press PAUSE.
1
Enter 1. Press PAUSE.
PAUSE PAUSE
To continue
programming
input
Enter manager
password.
Item
Programming Input
Changing the manager password.
0
0
+ + Password (max. 10 digits) +
326 Operating Manual Document Version 2014-11
4.1.2 Manager Programming