Panasonic KX-NS700 - Account Code Entry

• Enter the desired value in the "%" positions. You must enter the correct number of characters
as represented by the "%" using 0 to 9 or .
• The preprogrammed messages can be changed through system programming.
• To create your personal message (Message no. 9), refer to "3.1.2 Personal Programming".
1.3.2 Account Code Entry
You may give a specified account code to extension users and check their telephone usage. You can specify
an account code for each client and check the call duration.
Enter #.
Off-hook.
account code
Enter account code
(max. 10 digits).
Press Account or
enter 49.
Dial outside
phone number.
outside
phone no.
Seize a CO line before entering
an outside phone number.
D.Tone
94
(Account)
OR
PT/SLT/PS/SIP Extn.
• A Panasonic proprietary telephone extension user can enter an account code during a
conversation and when hearing reorder tone after the other party hangs up.
• Account codes may use the digits "0" through "9".
• Depending on the settings of your PBX, you may be required to enter an account code to
make an outside call.
• If you enter the wrong code, press the " " key and re-enter the account code.
• For your convenience, you can store the code with the phone number in the memory (e.g.,
Speed Dialing).
Customizing Your Phone
• 3.1.4 Customizing the Buttons
Create or edit an Account button.
Document Version 2014-11 Operating Manual 37
1.3.2 Account Code Entry