Panasonic KX-NS700 - Call Pickup

Call Park Retrieve
PT/PS/KX-UT133/KX-UT136/KX-UT248/KX-UT670
Press a flashing Call Park.
(Call Park)
PT/SLT/PS/SIP Extn.
Off-hook.
Enter 52. Dial stored parking
zone number (2 digits).
stored parking
zone no.
Talk.
25
C.Tone
• If a call is parked automatically, confirm the parking zone number on the display.
• If a call is not retrieved within a specified time, you will hear an alarm as a reminder
(Call Park Recall).
If an outside call is not answered within a specified time, it is automatically disconnected.
• For SIP phone users: Any SIP phone user can retrieve a parked call, but only
KX-UT133/KX-UT136/KX-UT248/KX-UT670 SIP phone users can put a call into a
parking zone.
• The Call Park button light shows the current status as follows:
Flashing red (for PT): You or another extension has a call parked.
Flashing red (for KX-UT133/KX-UT136/KX-UT248/KX-UT670): Another extension
has a call parked.
Flashing green (for KX-UT133/KX-UT136/KX-UT248/KX-UT670): You have a call
parked.
• If you hear a reorder tone when retrieving a parked call, there is no held call. Confirm
the stored parking zone number.
• After you park a call, you can perform other operations.
Customizing Your Phone
• 3.1.4 Customizing the Buttons
Create or edit a Call Park button or Call Park (Automatic Park Zone) button.
1.3.9 Call Pickup
– Call Pickup
– Call Pickup Group Monitor
–
Call Pickup Deny
46 Operating Manual Document Version 2014-11
1.3.9 Call Pickup